Tag Archives: buzz

Nathan Fletcher “Follow Your Mission” presented by Nixon

Nathan Fletcher is human. He faces challenges like you and I but perhaps on a different scale…

 

click on link to learn about Nathan’s daily routines, being a parent and his method of cell rejuvenation

Follow Your Mission With Nathan Fletcher, Presented by Nixon

screen-shot-2016-12-14-at-1-58-12-pm

Buzzsaw sk8 review with Darshan Gooch

 

Buzzsaw sk8 with Darshan Gooch from Stretch Boards on Vimeo.

Name: Darshan Gooch
Height/weight: 6’4″ 185 lbs

Board model/dimensions: Buzz Saw sk8 6’0″ x 19.5″ x 2.25″ vol.31.8L (straight off the stock board rack!)

Construction type: CFT std (1/8″ bamboo stringer, marko foam 2.1pcf compression molded EPS, deck channels, 45º bias weave S-glass and RWG) + striped carbon tail strips

Fins used: Futures Timmy Patterson (sides) with Fins Unlimited S2 Stretch fiberglass 4.25″ quad rear pair

Conditions tested: Point breaks, reefs and beachbreaks,. Average to good waves, from slopey / mushy, and into hollow barreling waves as well.

Background (general skill level, current board(s), misc. other factors):

Just another working class parent from around the way. Continuing to remain passionate about riding waves, while keeping those kids fed and bills paid. 25 years surfing experience.

Initial thoughts/expectations (was this really what you thought you were getting?):

This was actually a stock board that was sitting in the factory. Initially I was drawn to this board looking for a daily driver to fill a few places where my quiver was lacking. Although the volume was a little towards the full side for my comfort, I previously had really enjoyed my experiences with the Super Buzz and was interested in going further down the rabbit hole prior to our El Niño season of 2015/16.

What wave types do you imagine surfing when viewing this design? (full spectrum and size range):

Since this board is coming from the daily driver sector I would imagine this board to cover a wide range of waves / conditions from average to good waves.

Ride experience:

Perhaps due to new board excitement, I found my first wave to actually be one of the best waves I ever caught on this board. The Buzz Saw paddled very comfortably and with my feet slipping right into the sweet spot of the concave SK8 deck I was ready to dig in at first draw. Over time I found this board to fit and work best in the pocket or curvature of the waves face. Also having great tube riding capabilities, there were a number of sessions were I took the Buzz Saw into waves outside of what I perceived to be it’s preferred size range. More often than not, I was surprised at Buzz Saw’s capacity to adapt and conquer in good waves in the overhead range.

Likes/Dislikes:

The Buzz Saw thrives to fit and be pushed through turns in tight/round places on the wave where your standard shortboard might not fit. Perhaps my stubbornness to only ride this board as a quad made for times when I struggled or fought the extra volume of the skate deck in slopey or mushy parts of the wave. Considering my size 13 foot, I may have found my width limit for preferable SK8 deck options here.

General observations:

The Buzz Saw has an uncanny ability to be very adaptable from average everyday fun, into great waves that would be more performance oriented.

Summary (synopsis, recommendations or overall feeling you would tell a friend):

Lively daily driver that loves to be ridden in the pocket and also thrives in the decent to good waves category.

IMG_4251

voluptuous curves deserve something to feast on. gooch nurtures the buzzsaw sk8’s voracious open face appetite. photo: chachi

IMG_3749

“baby got BACK!” the butt tail is the default stock template off the rack. nice curves! chemically transformed image sharing courtesy of: darshan gooch

 

“NO FRIENDS” model ride review with Andrew Bennett

It’s summertime!!! Crowds, “so-so” waves and the pervasive struggle to get your slash on could use a good remedy. The “NO FRIENDS” model is your answer!

learn more about the NO FRIENDS model by clicking here

No Friends model ride review with Andrew Bennett from Stretch Boards on Vimeo.

 

check available NO FRIENDS models on our webstore or contact info@stretchboards.com to get dialed in on a new custom!

 

Name: Andrew Bennett

Height/weight: 5’10” 180 lbs

Board model/dimensions:

No Friends 5’4” x 21″ x 2.25″ vol.32.3L

Construction type:

EPS/EPOXY

Fins used:

Fins Unlimited custom hand foiled BUZZ template 4.875″/4.0″ fcs base with FCSII plugs and tab in-fill kit

Conditions tested:

The Hook, Chest high. Weak and crowded.

Background (general skill level, current board(s), misc. other factors):

I typically ride much better, but still summer style CA waves on my 5’6” PU/CFT glassed Super Buzz with Buzz Quads.

Initial thoughts/expectations (was this really what you thought you were getting?):

It felt like a lot of volume under my arm especially with the amount of width.

What board models come to mind when checking out this design?

I rode the Dominator model by Firewire and it was similar. The No Friends model felt like it wanted to turn in a shorter radius though. I never rode the Average Joe by Channel Islands but maybe that would be similar.

What wave types do you imagine surfing when viewing this design? (full spectrum and size range):

I think the board was ideal for the weak chest high conditions that I took it out in. It gave me a reason to paddle out.

Ride experience:

The board felt like it wanted to turn quickly/pivot. It was very buoyant and responsive so it made it easy to squeeze in a bunch of turns without any help from the wave.

Likes/Dislikes:

The board didn’t feel like it wanted to project and create any lateral speed. I notice my super buzz has much more drive in comparison so it wants to go super fast down the line. But the No Friends felt like it was designed to keep turning in a tight radius.

General observations:

It’s a worthy board to have in the quiver for really gutless waves that are chest high and under.

“If I could choose between this and one other model, I would get the (fill in the blank)

I think for completely gutless tiny waves this would be the right board to jump on. My G-Buzz worked in a little bigger surf than the No Friends model and had more projection. But I think they both have their place in different surf.

How well does this board match up to it’s model description?

The model name is definitely spot on. It was a “no friends” kind of session at the hook. Without bogging at all the board catches anything and turns on a dime.

Summary (synopsis, recommendations or overall feeling you would tell a friend):

The no friends model takes the struggle out of summer flat spells.

 

no friends spec sheet

Screen shot 2016-07-14 at 4.16.58 PM

outline and volume comparison of G-buzz sk8 vs. NO FRIENDS built with same dimensions.

IMG_7138 copy

No Friends is fully customizable in CFT, PU/PE, or EPS/EPOXY construction options. Dimensions, logos and all options offered through Stretch Boards are just a phone call or e-mail away!

IMG_6720

4 different model logo options available!

Buy a board = get premium fins at discount $

Buy any board (new or used) from store.stretchboards.com and receive 25% off any fin set in stock!

just add to cart and use promo code: UPGRADE

offer expires December 31, 2015

Modern day surfing as we know it wouldn’t be the same without fins. Surfboard design is a whirlwind of design theory and application. The fins on your board as you can imagine are equally as significant. Whether you are adept at dissecting rocker profiles and outlines, chord length and foil sections or just don’t have a clue what the difference is between future and fcs fin systems, don’t you worry… you’re definitely not alone.

Highly sensitive and ultra “tuned-in” surfers may be able to discern the flex difference in their glass job or the extra 1/16″ lift in tail rocker but for everyone single person who surfs, simply swapping out fins can give you insight, perspective, adaptability, confidence, control and (most importantly) the sought after joy that surfing brings.

For a fraction of the $ cost, space, decision making and time it would take to get a new board for that slightly different and elusive magic board sensation, it’s a no brainer to simply swap out your fins into the board you’ve already got.

Simplicity is admirable. Versatility is significant. Having the ability to switch fins with the turn of a screw (or a quick snap out/in) is something previous generations of surfers had only imagined.

Stretch-Super-Buzz-Quad-Buzz-Fins

Fins Unlimited custom hand-foiled fiberglass fin sets are made in the USA exclusively for Stretch Boards. They come in 3 different templates and various sizes in both FCS and Future systems. These are limited in supply and are available only from store.stretchboards.com

Now is a good time to be a surfer. A variety of fin templates, sizes, foils, constructions and even matching colors are available to dial in your ride!

IMG_1586

Tri or quad??? Wiggolly has the ability to swap out as conditions warrant, such as these FCS II AM2 Large tri’s in his 6’6″ semi-gun for Pipe.

 

questions???

send a message to: info@stretchboards.com

 

 

 

 

Open House November 27th, 2015

harbor sunset background pic.OPEN HOUSE flyer PRINT

Stretch Boards is hosting a holiday open house event on Friday November 27th. We’ll be swinging open the factory doors to anyone who has always been curious as to what goes into making a custom built surfboard.

There will be light refreshments, beverages, working factory tours and face to face customer support for any surfboard related topic you can fathom.

Check out some cool new projects, unique custom builds not seen elsewhere, view a bit of Stretch memorabilia and join in on the community of surfers which make the Stretch Boards family what it is today.

Black friday deals on apparel, fins, accessories, stock surfboards and new custom orders will be in full effect also!

 

This event is in conjunction with Second Harvest Food Bank of Santa Cruz County. Bring in minimum 4 non-perishable food items to receive extra special deals!

Our factory is located at the end of Tower Place just off Felt St. It is the largest dedicated epoxy glassing factory in North America and is unlike most every other traditional surfboard factory you will encounter. There is no VOC release or harmful chemicals, messy work areas or hazardous concerns (save for the dust factor). If you’ve ever been curious as to how a sustainable surfboard can be built then this is the perfect opportunity to see first hand!

 

DSC_4503 DSC_4500DSC_4502 DSC_4497