Author: dave

2×4 round pin Ride Review with Darshan

2×4 round pin first ride review with darshan gooch from Stretch Boards on Vimeo.

Height/weight:

6’4″ 180-185 lbs

2×4 round pin 6’2″ x 19.25″ x 2.375″ vol. 32.0L

darshan testing the 2×4 round pin barrel riding capabilities photo: Bryan Garrison @wetfeetphoto

Construction type:

6’2″ x 19.25″ x 2.375″ shown with abstract color lamination and futures AM2 techflex thruster set.

CFT std with uni-directional carbon tail strips and with the exception of the abstract color lam bottom, features duplicate CFT std glassing as seen in previous Thing v2 round pin ride review seen here

Fins used:

Futures AM2 thruster set:

fronts: 4.73” deep by 4.64” base – flat foil

center: 4.49” deep x 4.63” base – symmetrical foil

Fins Unlimited custom Stretch Generation 2 quad set:

Fronts: 4.75” deep by 4.625” base – custom stretch inside foil

Quad rears: 4.25” deep by 4.25” base – symmetrical foil

Conditions tested:

Wintery types of CA waves varying from chest high to several feet overhead.

Initial thoughts/expectations (was this really what you thought you were getting?):

The initial idea when ordering this particular 2×4 model was to find the performance differences between the THINGv2 and 2×4. We basically kept the dimensions and construction completely the same. I would imagine a fair portion of people ordering the 2×4 may have ridden it a little bit shorter. Considering the time of year and lack of any contemporary tri or quad fins available in my quiver, I thought I better get with a board that could not only fill a missing link in my quiver, but also a board that would be adaptable in the decent to good wave category.

What 3 board models come to mind when checking out this design?:

Stretch’s THINGv2, Matt Biolos’ Mini Driver, Channel Islands Fred Rubble?…

What wave types do you imagine surfing when viewing this design? (full spectrum and size range):

One of the strong points of this particular board is it’s fairly adaptable. Beach breaks, Reef’s, Point breaks, anything with enough juice to get you going and some space to move around. I had a couple great surfs on this board in hollower/down the line type of waves where I rode it as a quad. The majority of the time i rode this board as a tri fin as the waves on offer around town this time of year seemed most suitable.

Ride experience:

In all honesty this was a slight adjustment and exercise in remembering how to ride a contemporary shortboard again. My experience was a little humbling at times considering this past year I have mostly been surfing with twin-fins and singles. Similar to the THINGv2 I tested last year, I found the 2×4 to have a vague familiarity and user-friendly characteristics. Immediately there was an ease or comfort factor when standing up and getting moving. My personal challenge was making the subtle adjustment of stepping further back and finding that sweet spot towards the back fin. (Which isn’t quite the same with a twin fin in particular.)

Likes/Dislikes:

I think there is something to be said here about adaptability and having a board you know you can rely on. The only dislikes worthy of mention would be my own personal limitations from prior lack of interest in contemporary shortboards, This resulted in issues of the balance, timing and rhythm department of my own physical doing.

General observations:

In comparison to the single concave throughout the THINGv2 , I felt there was a little more excitement or eagerness of availability on the back foot that felt like quicker rail to rail transitions.

“If I could choose between this and one other model, I would get the ….. (can be a different stretch model or any other shaper/design):

I’m torn between the 2×4 and the THINGv2 at this point. If I primarily rode contemporary shortboards on a regular basis, I may be leaning towards the 2×4 due to the liveliness available off the back foot. At this point in my limited use and interest in “shortboarding” on a regular basis, I would probably lean more on the predictability and control that the THINGv2 offers.

How well does this board match up to it’s model description?:

I can only account for the slightly longer version being consistent with it’s description. Perhaps a slightly shorter/wider version might be the perfect adjustment in the small to medium sized waves category if you are primarily a conventional “shortboard” type surfer.

Summary (synopsis, recommendations or overall feeling you would tell a friend):

The 2×4 is highly adaptable, user-friendly, performance shortboard. Daily driver certified*

Check out the Stretch Boards webstore for available stock 2×4 models or contact orders@stretchboards.com to get started on a new custom!

Exactly the same construction as the previous Thing v2 round pin, CFT std with marko EPS, bamboo stringer, 6oz. RWG bottom and deck with 4oz. bias S-glass and carbon tail strips.

 

“What’s he riding?” Willy Aliotti’s blacked out quiver

Check out what models William Aliotti regularly packs into his bag for travel.

height/weight:
1.75m  by 70 KG
(5’8″ 165lbs.)

 

All boards built with:
CFT medium construction
  • 4oz. RWG + 4oz. bias S-glass bottom / 4oz. bias S-glass + 6oz. RWG deck
  • 2.1pcf Marko Foam EPS core
  • 1/8″ bamboo stringer
  • deck channels

3k uni-directional carbon fiber tail strip reinforcements

Future ILT fin system with Jordy Smith Medium HC 4.54″ height by 4.59″ base

Whether threading through gutting tubes on his frontside or wafting tail-free drifts in small points on his backhand, Willy finds the Lil Buddy as his “go-to” board. photo: david aumentado

 

Lil Buddy squash tail – 5’10” x 18.187″ x 2.13″ vol. 24.3L

“personally the Lil Buddy is the board for me that i can take on any trip ! for any kind of condition like proper barrel 4 to 6 ft and in normal and mellow waves from 2 to 4 ft ( the lil buddy model will be the first one in the board bag”

Willy cracks a frontside ollie on his 5’8″ skate. photo: @laurentpujol

Skate swallow tail – 5’8″ x 18.25″ x 2.187″ vol. 24.5L

“the second board that i will always take on a trip is the Skate ! when the wind swoop on shore this board become amazing and really skatey on shity waves”

thing v2 CFT 5’9″ x 18.187″ x 2.13″

Thing v2 squash tail – 5’9″ x 18.187″ x 2.13″ vol. 24.8L

2×4 step up round pin – 6’4″ x 18.25″ x 2.4″ vol. 29.5L * modified nose outline and tail rocker

“…and to finish my perfect  last boards of the quiver on barrel destination i will always the 2X4 step up and normal short board”

aiming for the cosmos on his cosmic color lam thing v2. photo: @chroniclesofchristie

 “i trust stretch surfboard more then any other! i just thinks they are super solid and so performance! they stay magic forever and never get old”

Willy has switched from his rocket red airbrushes into the dark side. Apparently Stretch didn’t get the memo when he decided to surprise Willy with this neon twinnie!

 

 

Speak softly and carry a big foil

Perennial waterman Peter Trow floats along with his custom Stretch foilboard.

photo/video/edit by Ian Boyd

Hydrofoil Surfing with Peter Trow from Ian Boyd on Vimeo.

So…. what exactly are Stretch and Pete putting together?

Modified No Friends model 5’10” x 20″ x 3″

EPS/EPOXY light construction with stringerless 2.1pcf Marko foam blank and some carbon treatment.

Tuttle box mates a Go Foil Kai model.

You may recall Pete’s previous foray into foiling when he teamed up with Stretch on a kite foilboard a little over a year ago. When the wind isn’t blowing and the swell is building, it’s pretty funny to hear him tell me that he’s amping for the waves to get crappy so he can go surf!

Custom foilboards are available to order. send any inquiries to orders@stretchboards.com

IMG_1505 image3 image2

 

 

 

 

“What’s he riding?” Sancho’s 3 board quiver

The globe trotting Frenchman seemingly finds himself sliding into more fun waves every time we look. Here’s what he’s been getting his feet into lately:

Benjamin Sanchis (a.k.a.- Sancho)

height/weight:
1.80m  by 86 KG
(5’11” 190lbs.)

 

Mr. Buzz sk8 bat tail – 5’6″ x 19.65″ x 2.4″ vol. 32.8L
CFT std construction
FCSII quad with fiberglass Split Keel quads

 

2×4 round pin – 6’0″ x 19.25″ x 2.5″ vol. 32.0L
2.375″ adjusted rail profile
CFT med construction
FCSII 5-fin convertible with Stretch template WR large quad PC carbon 4.625″/4.125″

 

2win double wing swallow – 5’6″ x 20.35″ x 2.65″ vol. ???
nose “pugged 4″ from a 5’10”
CFT med construction
FCSII twin with MR PC twins (plugs for twin trailer were retrofitted but not yet used)

 

IMG_8782

laundry day quiver shoot. photo: manu migueles photography

 

“Where do you like to surf these models?”

i really enjoy more on reef breaks and points. i can surf the 2×4 6’0″ on an everyday basis in the canaries from slabs to fun powerful reefs.

i surf the mr. buzz everyday also when the waves are small, or fun little waves where my chick surfs.

also in points but work good in little slabs. same for the twins.

“What is it that you like or don’t like about any of these boards?”

the 6’0″ can feel a bit stiff at the drop sometimes. works a lot better in glassy/offshore conditions. but, is the fastest board ever! feels really confident. goes good for turn. (stretch should stop bothering putting the 5 fins set up…heheheh) if i had to choose one board to go on trip will be this one.

the Mr Buzz ,
really really user friendly. goes really good with those fins, got lots of flow.
sometimes feels a bit short on the back hand.
perfect for summertime but hold the rail in points also. good for carving.

here’s some fun follow cam footage of the 5’6″ mr. buzz sk8 carving:

 

 

the twin is a little devil.
it’s crazy fast! holds the rail in turn but also super loose in turn.
rare for a twin but good on the backhand.

 

check the video below to see Sancho laying rail on his 5’6″ pugged 2win.

 

“Are there any comparisons to other boards?”

no. riding those boards is like riding something different which makes it cool. it’s a different vibe.
i have your boards that i have been riding for the last 3 years. no other boards last that long!

“If you had the chance to change anything, what would it be?”

i’d put the factory in europe so it will be easier for me to get boards 🙂 then i could bug stretch all the time in person and talk to him about fins.

 

sancho slips into a goodie to evaluate quad fin placement back home. photo: manu migueles

sancho slips into a goodie to evaluate quad fin placement back home. photo: manu migueles

IMG_8784

through the looking glass. sancho fins his 2×4 round pin getting the hero shot.

Nathan Fletcher “Follow Your Mission” presented by Nixon

Nathan Fletcher is human. He faces challenges like you and I but perhaps on a different scale…

 

click on link to learn about Nathan’s daily routines, being a parent and his method of cell rejuvenation

Follow Your Mission With Nathan Fletcher, Presented by Nixon

screen-shot-2016-12-14-at-1-58-12-pm

2win fin ride review with Darshan

Two fins in it to 2win it from Stretch Boards on Vimeo.

 

Surfer: Darshan Gooch
Height/weight: 6’4″ 185lbs.
Board model: 2win single wing swallow tail
Dimensions: 5’11” x 19.75″ x 2.375″ vol. 32L
Construction type: Varial foam core  (no deck channels) + CFT std glassing + carbon tail strips
Fins used: futures Akila Aipa fiberglass 5.4″

fullsizerender-9

What comes to mind when checking out this design?

dscf1639-copy

the importance of rail profile, rocker, edge and fin placement are amplified in twin-fin designs. stretch and darshan examine the minute details.

Considering this is Stretch’s version of a modern twin-fin, it stands alone. Channel Islands has an updated version of the Merrick Twin but i don’t feel that these boards are comparable.

Where do you think this board will shine?

I imagine this board to be very adaptable in an assortment of different waves, mostly waves I wouldn’t consider riding a standard or contemporary shortboard.  Most ideally this would be for waves in the thigh to head high range that would be lacking in quality or substantial curve throughout the wave face.

Location/conditions surfed:

Sub average to decently good waves and everything in between: beachbreaks, mushy to decent point waves, wedgey and fairly hollow reefs. This board can be a real “go-getter”!

Initial thoughts/expectations:

Originally I had ordered this board amidst our 2016 summer season in hopes of finding a fun and user-friendly board that would get me excited to surf an assortment of sub-average summer-type waves.

screen-shot-2016-11-15-at-2-18-34-pm

darshan bleeding speed via active rail engagement. photo: Kookson@aol.com santacruzwaves.com

 

Ride experience:

The “2WIN” immediately turned me into a 14 year old frothing grom again! Like experiencing the excitement of a fish for the first time, there was an immediate spark and sensibility of speed and freedom as soon as you hit your feet.  One of my favorite things about the 2WIN is riding that line between casual flow and radicalness. Naturally this board goes fast without the struggle of having to create your speed. It’s up to you where and how you want to use or bleed all that forward trajectory. For me the art of twin-fin surfing is learning how to use and engage the rails more actively, while exploring those boundaries of speed and control.

 

General observations:

I found it very suiting for the types of waves I surf regularly around Santa Cruz. With uncanny accessibility to an abundance of speed and a natural sense of user friendliness, the 2WIN proved to be very adaptable. What i had initially ordered for so-so summer days, turned into a board I felt confident bringing into larger overhead barreling waves. This is now a board I am having a hard time putting down.

Eventually when I pushed this board into waves that became too steep or square (far outside of it’s intended capabilities) the tail could begin to drift or slide. Sometimes if I mis-stepped behind the fins the board became a bit too squirrely and directionally challenged.

At times I found it challenging to project vertically in tight places, and sporadic situations. I don’t think this board is vertically challenged as much as it needs the appropriate time and space to find it’s optimum line.

Likes/Dislikes:

Strengths = natural speed and user-friendly characteristics.

Weaknesses = Not a “do-it-all” design for me. Need to pay attention to what that back foot is doing.

“If I could choose between this and one other model, I would get the …..

In a perfect world I would choose a 2WIN 2.0 version geared for the winter season and better waves in mind. And have the current 2WIN for a variety of average, to sub average conditions.

Summary:

“Twin it “2-WIN” it!” This board is sure to put a smile on your face especially if you are feeling tired of your conventional shortboards and stuck in the rigidity of habits and routines.

How did the difference in foam core affect performance?

The “2WIN” is the second Varial Foam blank I have tested. Initially Stretch made me two THING’s, a version with a 2.1pcf Marko foam EPS blank with 1/8″ bamboo stringer, and a duplicate THING using  Varial Foam, both in CFT construction glassing.

During the sessions where I compared both THING’s, I first noticed a subtle damping effect when surfing the Varial board in semi-chattery conditions. In cleaner conditions there were times when I could feel the board loading up in turns and almost having some subtle springiness qualities as you are unloading pressure. Almost like a rubber band on a very small scale.

My feeling is that Varial could have a lively, more natural – multi dimensional flex pattern as it interacts with the wave and different weight distribution. The subtleties of Varial had proven very hard for me to pick up on immediately, so I was interested in trying it in a summer type surfboard such as the “2WIN”.

Both these boards built with Varial cores were and still are durable. Outside of foot dents, I am amazed that neither boards have had any legitimate dings on them.

Compared to my CFT constructed boards with EPS/EPOXY, both of these Varial foam versions were not “lighter”. The THING built with the Varial foam actually weighed 6oz. more than the Marko foam and bamboo stringer version. There are a lot of variables in surfboard construction of course. Personally I’m not a “team light” kind of person and I don’t mind a little weight and these boards seemed appropriate to me. Not heavy in the slightest degree.

Honestly, I think a custom built surfboard with a longer lifespan is a step in the right direction. Some may find it a challenge to notice the performance differences but maybe that’s where the fun is at, learning and experimentation. Enjoy!

mos-tube-photo-by-brian-garrison-wet-feet-photo

photo: brian garrison

 

William Aliotti joins the NIXON Pro team

Nixon | Welcome William Aliotti to the Team from NIXON Europe on Vimeo.

Not too unlike motorcycle clubs compelling you to work for that 3-piece patch, showing your worth and earning the respect of the vanguard, you can’t just join the Nixon team. One has to be voted in by the other members in order to join the elite Pro ranks of the tight knit family.

Through years of support from Nixon Europe, William’s hard work and commendable attitude both in and out of the water allowed him to prove his mettle to the surfing world. He’s just been voted in to be a full fledged member of the Nixon Family. Congratulations William!

william_aliotti_cmegan_vibert

william_aliotti_cnixon_1

What Dane Rode for SITD2.0

13 unmarked 6’0″ shortboards. 1 anonymous pro surfer. The challenge to create the most high performance surfboard design was underway for the second iteration of Stab Magazine’s resplendent feature project “Stab in the Dark” featuring Dane Reynolds in South Africa.

If you missed the full video then do yourself a favor and indulge 1/2 an hour of your downtime by clicking here to watch

… then enjoy a few minutes by clicking here to learn more about Stretch’s design principles and what went into making board #23

 

snapshot

 

the board:

sitd-sword-deck sitd-sword-btm

modified Sword squash tail

6’0″ x 19″ x 2.5″

volume*: 30L+

*not entirely certain on the exact volume since the design criteria was for a newer model to be hand shaped. We have it digitized now and it comes out to 30.2L

CFT med Factory Pro construction:

  • 2.1pcf Marko Foam EPS core with Epoxy glassing
  • 1/8″ bamboo stringer
  • 4oz. S + 4oz. bias weave S + 4oz. E stomp patch deck lamination
  • 4oz. S + 4oz. bias weave S bottom lamination
  • no deck channels

Futures ILT tri-fin

Would we have liked to see a non-jet lagged Dane Reynolds going mental in 8′ drainers instead of less than ideal beach break conditions? Sure. Well, he didn’t get to ride it again but the limited time he spent getting his feet into it sure was fun to watch!

Would you like to have a crack at riding the same board? For FREE??!!??!! We made a total of 4. All you have to do is go to stabinthedark.stabmag.com and enter to win!

 

or… if you want one right now then you can scope it at http://store.stretchboards.com/product/the-sword

scalewidthwyixmtmwil0-stab0200ewing-forweb

Where’s Sancho – INDO EDIT

Benjamin Sanchis, a.k.a.- “Sancho” has the grueling task of traveling around the world to hunt down mind bending barrels for the enjoyment of your viewing pleasure.

WHERE IS SANCHO l KANDUI from FTR Films on Vimeo.

screen-shot-2016-09-22-at-11-56-34-am

Buzzsaw 5’10.5″ x 19.35″ x 2.5″ bat tail CFT med. construction FCSII quad with “feathered brush fade” colorwork by Sandy.
screen-shot-2016-09-22-at-11-48-49-am screen-shot-2016-09-22-at-11-49-37-am screen-shot-2016-09-22-at-11-49-51-am screen-shot-2016-09-22-at-11-50-04-am screen-shot-2016-09-22-at-11-50-14-am screen-shot-2016-09-22-at-11-50-23-am screen-shot-2016-09-22-at-11-50-33-am

 

 

Thing v2 6’2″ x 19.2″ x 2.5″ round pin CFT med. construction FCSII 5-fin with “vert brush fade” colorwork by Sandy.
screen-shot-2016-09-22-at-11-51-24-am screen-shot-2016-09-22-at-11-56-08-am