Surfboards

Quadfish

We've taken our quad technology and applied it to a traditional fish design to produce a board that will do full rail turns and surf more vertically. It's basic features produce speed while it's subtle differences provide action. If you want to surf fast at speedy points or mushy beach breaks, the Quadfish delivers.

Options
Specs
Colors
Prices

Recommended sizes

5'6"-6'6" + 1 1/4"-1 1/2" width

Tail Options

The Quadfish comes standard with a 5" deep swallow tail.

Deep Swallow Tail Standard configuration
Bat Tail Available upon request
Add Wings Single or double wings in conjunction with a swallow or bat tail are popular additions to our Quadfish.

Types of Tails

Round Pin Tail

Moves the "sweet spot" slightly farther ahead on the board, in front of the fin cluster.
Offers a different release & hold for deep carves and more drawn out turns
Shortens the "effective rail line" and with respect to board length, resulting in less area on the tail to penetrate the wave face so that you can actually sink a section of tail deeper than other templates.

Thumb Tail

Softens the pivot points on the end of the rail line while keeping a smooth flow like a round pin without taking away the tail width

Squash Tail

Top to bottom surfing
Free the tail on all your turns
HIt the lip and more while you rip it down the line.

Bat Tail

Offers a more pivotal, snappy feel
Loosens up the board by having the rail line end shorter
Relative to other tails, the bat is wider at the block, allowing the rear foot to move further back in to the fin cluster.
Combines the swallow tail feel but with more stability

Diamond Tail

Offers an aesthetic alternative to the bat tail while keeping the same performance features

Swallow Tail

Quick, loose and responsive for snappy turns off the top
For similar results with a more distinctive look, try our Moon tail

Baby Swallow Tail

Quick, loose and responsive for snappy turns off the top
Baby swallow tail is a reduced version primarily used on big wave boards

Deep Swallow Tail

Quick, loose and responsive for snappy turns off the top
For similar results with a more distinctive look, try our Moon tail

Moon Tail

With performance features similar to the swallow tail, the Moon adds a much more distinctive look.

Winged Tail

Pulls in the outline at the trailing edge of the fins as a way to break the water along the rail line.
Adds a snappier and more pivotal turning characteristic as opposed to a full rail turn.

Fin Options

The Quadfish comes standard as a four-fin configuration. We recommend this board with "fuller" fins from 4 3/8" to 4 1/2" with 3 3/4" symmetrical rear trailers.

Choose from Future or FCS

Outline

The Quadfish utilizes a balanced and full template with straighter rails in a voluptuous outline. It carries substantial nose width while still managing to bring in the tail to a practical width.

Rocker

Lower entry for easy paddling along a smooth, continuous rocker.

Rails

Medium, soft 50/50 rails retain thickness from center and up into the nose for that distinctive beak. The subtly domed deck brings the thickness out to the rail without being boxy and full. The hard edge behind the front fins give a crisp release.

Bottom

Slight vee in the nose to a slight single concave between your feet exiting through a more pronounced vee out the tail.

Construction

All Boards 6’5” and under include:

2lb PCF Marko EPS foam
3/16” Para Band Bass Stringers
Hexcel RWG Direct Size “E” Cloth
JPS Direct Size Bias Weave “S” Cloth
Resin Research Epoxy Resin
Deck Channels
* Medium to heavy construction available above 6’5”

Custom Artwork

Stretch Boards works with pen artist Kevin Walsh to create custom artwork. Contact us for pricing.

Airbrush

Stretch boards offers airbrushing on all custom orders.

Solid color airbrush is $25
One-color fade is $30 (nose/tail/halo)
Two-color fade or halos are $35 (includes white)
Large boards (above 8'0") are extra $5
Single pin line are $15
Double pin lines $25
Color lamination $60/per side
Full board tint lamination is $75

Yellow
Orange
Green
Blue
Grey
Red
One-color halo Choose your color
One-color halo (nose)Choose your color
One-color halo (tail)Choose your color
Two-color haloChoose your colors
One-color fade (nose)Choose your color
One-color fade (tail)Choose your color
Two-color fadeChoose your colors
Single pinlineChoose your color
Double pinlineChoose your colors

Surfboards

Size	Standard Standard EPS/EPOXY construction includes Marko EPS, future or FCS fins and Resin Research Epoxy.	EPS TECH EPS TECH adds the following: deck channels, s-cloth and bamboo stringer.
Up to 6'5"	$660	$725
6'6" - 6'11"	$690	$750
7'0" - 7'5"	$730	$785
7'6" - 7'11"	$760	$805
8'0" - 8'5"	$790	$840
8'6" - 8'11"	$825	$840
9'0" - 9'5"	$860	$875
9'6" - 9'11"		$910
10' 0" - 10' 5"		$945

Shipping

We use FedEx Ground to ship surfboards in the mainland USA.

The rates listed below are estimates we created for your convenience. To get an exact quote, use the RateFinder at the FedEx website.

FedEx Ground Shipping Rates Estimates by Box Size
Box Size	SoCal	Pacific NW	Texas	Florida	East Coast	North East
Up to 108"x24"x4"	$80-$85	$85-$90	$90-$95	$95	$100	$100
100"x23"x4"	$75-$80	$70-$85	$85-$90	$85-$95	$85-$95	$90-$95
Under 78"x22"x4"	$35-$40	$35-$40	$45-$50	$50	$50	$50-$55