Surfboards

Stretch Monster Gun

The Stretch Monster Gun is designed for advanced surfing in very large and powerful waves. With many design features taken from the Fletcher Monster Gun, this model serves as counterpart for those days when steep, bowly drops and calculated movements are the name of the game.

Options
Specs
Colors
Prices

Recommended sizes

8'10"-10'2"

Tail Options

Baby Swallow Tail
Round Pin Tail
Moon TailGarrett Macnamara's preferred choice

Types of Tails

Round Pin Tail

Moves the "sweet spot" slightly farther ahead on the board, in front of the fin cluster.
Offers a different release & hold for deep carves and more drawn out turns
Shortens the "effective rail line" and with respect to board length, resulting in less area on the tail to penetrate the wave face so that you can actually sink a section of tail deeper than other templates.

Thumb Tail

Softens the pivot points on the end of the rail line while keeping a smooth flow like a round pin without taking away the tail width

Squash Tail

Top to bottom surfing
Free the tail on all your turns
HIt the lip and more while you rip it down the line.

Bat Tail

Offers a more pivotal, snappy feel
Loosens up the board by having the rail line end shorter
Relative to other tails, the bat is wider at the block, allowing the rear foot to move further back in to the fin cluster.
Combines the swallow tail feel but with more stability

Diamond Tail

Offers an aesthetic alternative to the bat tail while keeping the same performance features

Swallow Tail

Quick, loose and responsive for snappy turns off the top
For similar results with a more distinctive look, try our Moon tail

Baby Swallow Tail

Quick, loose and responsive for snappy turns off the top
Baby swallow tail is a reduced version primarily used on big wave boards

Deep Swallow Tail

Quick, loose and responsive for snappy turns off the top
For similar results with a more distinctive look, try our Moon tail

Moon Tail

With performance features similar to the swallow tail, the Moon adds a much more distinctive look.

Winged Tail

Pulls in the outline at the trailing edge of the fins as a way to break the water along the rail line.
Adds a snappier and more pivotal turning characteristic as opposed to a full rail turn.

Fin Options

All quad guns come complete with custom Stretch fiberglass fins from Rainbow Fin Co. Available in either 3.75" or 4.0" even sized front and rear sets.

Weights

Weighting systems are calculated based on rider, wave type and board design. They can be added to any gun in 1/2 lb. increments up to 5 lbs. Strategically weighting a board repositions the center of gravity for enhanced response and control.

Weight installation

Each weight install is placed into the shaped blank and glassed over for strength and integrity. First lb. is $25.00 and $10.00 for each additional lb.

Outline

The Stretch gun has the wide point exact center with a slightly narrower nose and a fuller tail than the Fletcher Gun.

Rocker

Similar to the Fletcher gun, but with a slightly lower entry and a more continuous rocker.

Rails

Relatively thin in conjunction with Stretch's "Aztec Pyramid" deck profile. Thickness under your chest stays prominent with a flat deck out from the stringer before doming over. Rails retain thickness up into the nose and foil out to an ultra thin and sensitive tail.

Bottom

Reverse vee to flat with rolled vee out the tail.

Construction

All Boards 6’5” and under include:

2lb PCF Marko EPS foam
3/16” Para Band Bass Stringers
Hexcel RWG Direct Size “E” Cloth
JPS Direct Size Bias Weave “S” Cloth
Resin Research Epoxy Resin
Deck Channels
* Medium to heavy construction available above 6’5”

Custom Artwork

Stretch Boards works with pen artist Kevin Walsh to create custom artwork. Contact us for pricing.

Airbrush

Stretch boards offers airbrushing on all custom orders.

Solid color airbrush is $25
One-color fade is $30 (nose/tail/halo)
Two-color fade or halos are $35 (includes white)
Large boards (above 8'0") are extra $5
Single pin line are $15
Double pin lines $25
Color lamination $60/per side
Full board tint lamination is $75

Yellow
Orange
Green
Blue
Grey
Red
One-color halo Choose your color
One-color halo (nose)Choose your color
One-color halo (tail)Choose your color
Two-color haloChoose your colors
One-color fade (nose)Choose your color
One-color fade (tail)Choose your color
Two-color fadeChoose your colors
Single pinlineChoose your color
Double pinlineChoose your colors

Surfboards

Size	Standard Standard EPS/EPOXY construction includes Marko EPS, future or FCS fins and Resin Research Epoxy. Applies to boards like S2, Sword, Ratskate, S-10, Pugs, What!?, Twin-fin, Magnet, Thing, Quadfish and Fletcher Four-fin	Heavy Heavier EPS/EPOXY construction board models include: Step-off towboards, strapless kiteboards, semi-guns, guns, IT's and all longboards (box fin not included)
Up to 6'5"	$660	$690
6'6" - 6'11"	$690	$720
7'0" - 7'5"	$730	$755
7'6" - 7'11"	$760	$790
8'0" - 8'5"	$790	$825
8'6" - 8'11"	$825	$865
9'0" - 9'5"	$860	$900
9'6" - 9'11"		$945
10' 0" - 10' 5"		$990

Shipping

We use FedEx Ground to ship surfboards in the mainland USA.

The rates listed below are estimates we created for your convenience. To get an exact quote, use the RateFinder at the FedEx website.

FedEx Ground Shipping Rates Estimates by Box Size
Box Size	SoCal	Pacific NW	Texas	Florida	East Coast	North East
Up to 108"x24"x4"	$80-$85	$85-$90	$90-$95	$95	$100	$100
100"x23"x4"	$75-$80	$70-$85	$85-$90	$85-$95	$85-$95	$90-$95
Under 78"x22"x4"	$35-$40	$35-$40	$45-$50	$50	$50	$50-$55