Surfboards

Nathan Fletcher Four-Fin

The Fletcher Four-Fin has been well established as a high performance quad. Nathan is best known for his fearless, fast and high-flying approach to combining elements of speed, looseness, sensitivity and control.

Options
Specs
Colors
Prices

Recommended sizes

5'0"-7'0"

Tail Options

The Fletcher Four-Fin features a full tail similar to the Rat Skate only without a bump wing in the template.

Swallow Tail
Moon Tail
Bat Tail
Diamond Tail
Round Pin Tail Our round pin quad has exploded in popularity! Utilizing the traditional quad outline, Stretch and Nathan have worked on keeping the tail full while pulling the majority of the curve behind the fins within the last 6" of the tail.
Thumb Tail

Types of Tails

Round Pin Tail

Moves the "sweet spot" slightly farther ahead on the board, in front of the fin cluster.
Offers a different release & hold for deep carves and more drawn out turns
Shortens the "effective rail line" and with respect to board length, resulting in less area on the tail to penetrate the wave face so that you can actually sink a section of tail deeper than other templates.

Thumb Tail

Softens the pivot points on the end of the rail line while keeping a smooth flow like a round pin without taking away the tail width

Squash Tail

Top to bottom surfing
Free the tail on all your turns
HIt the lip and more while you rip it down the line.

Bat Tail

Offers a more pivotal, snappy feel
Loosens up the board by having the rail line end shorter
Relative to other tails, the bat is wider at the block, allowing the rear foot to move further back in to the fin cluster.
Combines the swallow tail feel but with more stability

Diamond Tail

Offers an aesthetic alternative to the bat tail while keeping the same performance features

Swallow Tail

Quick, loose and responsive for snappy turns off the top
For similar results with a more distinctive look, try our Moon tail

Baby Swallow Tail

Quick, loose and responsive for snappy turns off the top
Baby swallow tail is a reduced version primarily used on big wave boards

Deep Swallow Tail

Quick, loose and responsive for snappy turns off the top
For similar results with a more distinctive look, try our Moon tail

Moon Tail

With performance features similar to the swallow tail, the Moon adds a much more distinctive look.

Winged Tail

Pulls in the outline at the trailing edge of the fins as a way to break the water along the rail line.
Adds a snappier and more pivotal turning characteristic as opposed to a full rail turn.

Fin Options

We recommend smaller, high aspect ratio fins to medium raked/wide based fins with 4" symmetrical foiled rear trailers.

Choose from Future or FCS

Also Available

Available in Surftech's Tuflite construction

Outline

The Fletcher Four-Fin has the wide point exact center. This is a balanced template with a full nose and full tail. It's straighter rails running from the mid point to the tail induces speed and with two fins on the rail, allows you to take a high line with ease.

Rocker

Continuous rocker broadens the "sweet spot", increases turning ability and adds a "predictable" feel under your feet.

Rails

Medium-full 50/50 rail that holds the wave face no matter where you lean the board. The hard edge behind the front fins give a crisp release.

Bottom

Slight vee in the nose to a 5/16" deep single concave between your feet. Slight vee out the tail.

Construction

All Boards 6’5” and under include:

2lb PCF Marko EPS foam
3/16” Para Band Bass Stringers
Hexcel RWG Direct Size “E” Cloth
JPS Direct Size Bias Weave “S” Cloth
Resin Research Epoxy Resin
Deck Channels
* Medium to heavy construction available above 6’5”

Custom Artwork

Stretch Boards works with pen artist Kevin Walsh to create custom artwork. Contact us for pricing.

Airbrush

Stretch boards offers airbrushing on all custom orders.

Solid color airbrush is $25
One-color fade is $30 (nose/tail/halo)
Two-color fade or halos are $35 (includes white)
Large boards (above 8'0") are extra $5
Single pin line are $15
Double pin lines $25
Color lamination $60/per side
Full board tint lamination is $75

Yellow
Orange
Green
Blue
Grey
Red
One-color halo Choose your color
One-color halo (nose)Choose your color
One-color halo (tail)Choose your color
Two-color haloChoose your colors
One-color fade (nose)Choose your color
One-color fade (tail)Choose your color
Two-color fadeChoose your colors
Single pinlineChoose your color
Double pinlineChoose your colors

Surfboards

Size	Standard Standard EPS/EPOXY construction includes Marko EPS, future or FCS fins and Resin Research Epoxy. Applies to boards like S2, Sword, Ratskate, S-10, Pugs, What!?, Twin-fin, Magnet, Thing, Quadfish and Fletcher Four-fin	Heavy Heavier EPS/EPOXY construction board models include: Step-off towboards, strapless kiteboards, semi-guns, guns, IT's and all longboards (box fin not included)
Up to 6'5"	$660	$690
6'6" - 6'11"	$690	$720
7'0" - 7'5"	$730	$755
7'6" - 7'11"	$760	$790
8'0" - 8'5"	$790	$825
8'6" - 8'11"	$825	$865
9'0" - 9'5"	$860	$900
9'6" - 9'11"		$945
10' 0" - 10' 5"		$990

Shipping

We use FedEx Ground to ship surfboards in the mainland USA.

The rates listed below are estimates we created for your convenience. To get an exact quote, use the RateFinder at the FedEx website.

FedEx Ground Shipping Rates Estimates by Box Size
Box Size	SoCal	Pacific NW	Texas	Florida	East Coast	North East
Up to 108"x24"x4"	$80-$85	$85-$90	$90-$95	$95	$100	$100
100"x23"x4"	$75-$80	$70-$85	$85-$90	$85-$95	$85-$95	$90-$95
Under 78"x22"x4"	$35-$40	$35-$40	$45-$50	$50	$50	$50-$55